High Concentration Carbon Black Master Batch compounding pelletizing line

Application of carbon black:

The carbon black is mainly composed of carbon black, carrier resin, dipersing agent, lubricants etc additives. The carbon black master batch is usually used with other resin granules for injection and extrusion forming into various plastic products, mainly for dyeing and shielding ultraviolet rays.

Disadvantage explaination that adopting conventional twin screw extruder to produce carbon black master batch:

The traditional equipments to produce carbon black master batch is twin screw extruder, but because of its self-limitation of twin screw compounding pelletizing equipment, it will cause below disadvantages:

1. Small particle size and light weight of carbon black, it is very easy to bridge in the feeding process, and cause unstable feeding. The bridging problem will affect the dosing accuracy and reduce the concentration of carbon black in the master batch.

2. The twin screw compounding zone is with the characteristics of high pressure and high shearing, which is easy to partially compact the carbon black powder into dense agglomerates. Such agglomerate is difficult to be dispersed again in follow-up process, and resulting in black spots on the surface of the downstream forming products.

3. The twin-screw extruder has the characteristics of high shearing rate, which is easy to cause the material temperature to be too high. If the temperature of the material is too high, the dispersant and lubricant in the master batch will be decomposed and volatilized, thereby reducing the dispersibility and fluidity of the master batch as a whole.

4. The screw flight depth of the twin-screw is limited, so the working volume is low and it cannot withstand a large amount of carbon black powder feeding. As a result, the overall output of the carbon black masterbatch is low, or the carbon black concentration is low.

Advantage of GWHS Series High performance 4-Flight Reciprocating Kneader unit

1. The production process flow is continuous and with high automation. High-end manufacturers all choose reciprocating kneader to produce carbon black master batch. The entire production process to produce carbon black MB is a continuous production process, complete the whole production process from the raw materials to finished granules. The tranportation, weighting, feeding of raw materials and compounding pelletizing process is all automatically controlled to improve raw material dosing accuracy and production efficiency while reducing the labor cost.

2. Good mixing and dispersing effect, special flexible compounding principle effectovely make the carbon black dispersing in the resin evenly to improve the dispersion effect of carbon black MB. The material in the groove is subjected to instantaneous high-frequency shearing, stretching and splitting and shunting effects, thereby having a very excellent dispersion mixing and distribution mixing effect, the mixing effect is more than 20 times that of the twin-screw extruder.

3. Low energy consumption: main motor power greatly reduced. The above mentioned special flexible compounding principle makes it have excellent mixing and dispersing effect, and has a lower energy consumption ratio, which is more than 20% lower than that of the twin-screw extruder.

4. High working volume and high output: The screw design of reciprocating kneader adopts deep flight design, and with higher working volume to maintain high extrusion output and carbon black concentration. Meanwhile, the intermittent screw interacts with the pins to make it have a good self-cleaning effect.

Model of GWHS Reciprocating kneader unit

The core extruder equipment includes parallel twin screw compounding extruder, reciprocating

compounding kneader, double rotor compounding extruder, SCP high viscosity self cleaning

reactor and large capacity devolatilizer, etc.

At the same time, based on the above main extruder, the design and manufacture of a

complete set of compounding pelletizing production line equipment and compounding

extrusion forming production line equipment can be realized. It is mainly used in the fields

of engineering plastics, modified plastics, wire and cable materials, rubber, packaging,

building medical chemical industry, chemical fiber textile, household appliance and other

industries (see the application case for details).

The existing factory area of the company is 46500 m2 (of which the parent company is

38000m2, and the subsidiary (Nanjing Cenmen) is 8500m2), The core parts and system

of the extruder are designed and manufactured by the company, such as barrel, screw,

gear box, etc. The company has advanced NC machining center, NC screw grinder,

CNC machine tool and other machining equipment. Equipped with Swiss imported

three-coordinate detector and Japanese imported spectral detector and other

advanced inspection and testing equipment. There are complete quality control means

and system from processing to testing, which fully ensure the stability and reliability of

product quality.

The extruders produced by Cenmen company are exported to nearly 40 countries, such as

Germany, Russia, belarus, Japan, Korea, Israel, Ukraine, magiddon, Iran, Thailand, Indonesia,

Brazil, India, Mexico, South Africa, etc.